Using a PAR meter

Lighting, filtration etc

Using a PAR meter

Postby AileenRedding » Thu Jul 04, 2019 12:53 pm

I have the PAR metter and I have read a littlebit on the Apogee web site about our model. I need help with technical stuff. I have read several on-line pages of the Operation Manual. I have turned it on. I pressed the mode button; two options came up: Sun or electric. I choose electric. Then I pressed SAmple button on the meter (when nothing happened I pressed a couple of buttons. I got a reading of 5 to 6. A reading is supposed to be 3 digits, like 567 or so. I haven't been about the have the main menu come up. Can someone tell me how to do this? Thanks. :?
AileenRedding
GWAPA Member
 
Posts: 4
Joined: Sun Dec 16, 2018 1:21 pm
Real Name: Aileen Redding

Re: Using a PAR meter

Postby krisw » Sun Jul 07, 2019 9:28 am

Aileen, it sounds like you're doing it correctly. Were you getting that reading just sitting inside, or under an actual aquarium light? If just ambient light in your house, it's not surprising to get a very low number. If you hold it directly under your aquarium light, you'll get a three digit number, or maybe four.

You should expect your numbers at substrate to be between 20-100 in most cases. In super low light it can be less, and with really high light can be more. If running CO2 with dimmable lights, I would generally recommend shooting for ~60 PAR at substrate.

I hope this helps...
Image
User avatar
krisw
Site Admin
 
Posts: 6963
Joined: Fri Jan 09, 2004 3:25 pm
Real Name: Kris Weinhold


Return to Equipment

Who is online

Users browsing this forum: No registered users and 1 guest

Sponsors